Block paving
Clean, repair, re-sand, then apply a compatible paving sealer. The sealer is the final step, not a substitute for joint sand.
Adam & Eve Property Care cleans and seals block paving around Chippenham only after the joints are repaired and the surface is dry, which limits water and weeds working into the joints. Block paving sealing and patio sealing after cleaning, repairs, and joint work — plus compatible finishes for natural stone, concrete, and tarmac.
Clean, repair, re-sand, then apply a compatible paving sealer. The sealer is the final step, not a substitute for joint sand.
Use a breathable impregnating product selected for the stone. Moisture and previous treatments must be checked first.
Confirm the existing coating, wear, and slip requirement before choosing a compatible reseal system.
Use a tarmac rejuvenating coating rather than generic paving sealer, after cracks and failed patches are addressed.
Porcelain normally needs no sealer. Resin-bound surfaces require a compatible specialist top-coat and are assessed separately.
Identify the surface, old coatings, moisture, and defects
Clean, repair, repoint, or re-sand before sealing
Allow the surface and joints to dry fully
Apply the compatible impregnating or coating system evenly
It limits damage from water and weeds in the joints. Adam & Eve Property Care, working from Chippenham, cleans the blocks, repairs failed areas, fills the joints with dry sand, and waits until the surface is dry before sealing. Sealer on wet blocks, or over a loose base, does not stop the paving failing.
Block paving, concrete, imprinted concrete, natural stone, and sandstone may be suitable after inspection. The product must match the surface and any previous coating.
Usually no. Porcelain is low-porosity, so routine cleaning and correct joint care matter more. Any proposed treatment must be specifically approved for that tile.
The paving is cleaned, defects are repaired, joints are filled with suitable dry sand, and the surface is allowed to dry before a compatible sealer is applied.
Yes. PCAE works from Chippenham across properties within about 40 miles. Send photos and the postcode so access and scope can be checked.
Quoted with cleaning and preparation because sealer applied over dirt, damp, weeds, or failed joints will not perform correctly. The agreed scope and price are written down before work starts.
Not every surface should be sealed. Porcelain normally does not need sealer, resin requires a system-compatible specialist product, and sealer cannot repair an unstable base, trapped moisture, or failed joints.
Send photos, the postcode, and what you want fixed.
Get a fixed quote WhatsApp